Analysis Of Hinges (1), You Will Know It After Reading It!
High Wearing Feature Plate Round Hinge A hinge, also known as a hinge, is a mechanical device used to connect two solid bodies and allow relative rotation between the two. The hinge may be constructed from removable components or from foldable material. High Wearing Feature Plate Round Hinge Hinges are mainly installed on doors and windows, while hinges are more often installed on cabinet furniture. According to material classification, they are mainly divided into stainless steel hinges and iron hinges. In order to allow people to enjoy better, hydraulic hinges (damping hinges) have appeared. High Wearing Feature Plate Round Hinge characteristic is that it provides a buffering function when the cabinet door is closed, minimizing the noise caused by the collision with the cabinet body when the cabinet door is closed.
Hinge type
1. Straight bend hinge
Corrosion Resistance Door Metal Hinges The door panel covers the entire 18mm thick side panel of the cabinet (that is, the door panel covers 17mm of the side panel), and the hinge used is a straight-bend hinge.
(1) The default hinge hole distance is 110mm;
(2) The inner hollow depth of the side panel where the hinge is installed must be greater than 70mm;
(3) The straight-bent hinge can only cover a maximum of 17mm of the side panel, so the full cover of the side panel door panel with a thickness of 25mm or 35mm can only cover a maximum of 17mm.
2. Mid-bend hinge
Corrosion Resistance Door Metal Hinges door panel covers half of the 18mm thick side panel of the cabinet (that is, the door panel covers the side panel by 8mm), and the hinge used is a mid-bent hinge.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) The inner hollow depth of the side panel where the hinge is installed must be greater than 70mm;
(3) The center-bend hinge can only cover the side panel by 8mm at most.
3. Large curved hinge
The door panel does not cover the side panel of the cabinet at all (that is, the door panel covers the side panel 0mm), and the hinge used is a large-bend hinge.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) The inner hollow depth of the side panel where the hinge is installed must be greater than 70mm;
(3) The large curved hinge is embedded in the side panel and is suitable for side panels of various thicknesses.
4. 165° straight bend hinge
The 165° straight bend hinge has the same process as the ordinary straight bend hinge, except that the opening angle of the door panel is different.Corrosion Resistance Door Metal Hinges The opening angle of the ordinary straight bend hinge door panel is 90°, and the opening angle of the 165° straight bend hinge door panel is 165°.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) The inner hollow depth of the side panel where the hinge is installed must be greater than 70mm;
(3) The 165° straight-bend hinge can only cover a maximum of 17mm of the side panel, so the full cover of the side door panel seat with a thickness of 25mm or 35mm can only cover a maximum of 17mm;
(4) Commonly used in corner cabinet door panels.
5. 165° large curved hinge
The 165° large-bend hinge has the same process as the ordinary large-bend hinge, except that the opening angle of the door panel is different.Corrosion Resistance Door Metal Hinges The opening angle of the ordinary large-bending hinge door panel is 90°, and the opening angle of the 165° large-bending hinge door panel is 165°.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) The inner hollow depth of the side panel where the hinge is installed must be greater than 70mm;
(3) The 165° large-bend hinge is built-in relative to the side panel and is suitable for side panels of various thicknesses;
(4) 165° hinges also have half covers. If the installation master does not install a 165° large-bend hinge, the heightening block is a 165° medium-bend hinge;
(5) Commonly used in corner cabinet door panels.
6. 60° hinge
The 60° hinge is only used for the connection at the middle position of the linkage door panel of the corner cabinet.
Durable Adjustable Nut Swing Gate Hinges The hinge holes of the linkage door are opened on the same door panel, and the door panel on the side where the handle is installed has no hinge holes.
7. American hinge
The installation method of American hinges is quite special. The base part of the hinge is fixed on the fixed sealing plate on the same plane as the door panel. Durable Adjustable Nut Swing Gate Hinges is often used in in-line cabinets as corner cabinets, and part of the cabinet body is used as a fixed sealing plate.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) The width of the inner space of the side panel where the hinge is installed must be greater than 72mm.
8. Flat hinge
Durable Adjustable Nut Swing Gate Hinges Flat hinges are designed for flip-down doors and must be used with flip-down supports.
(1) The distance between the hinge hole and the edge is 110mm by default;
(2) Maximum door panel height H≤450, maximum door panel width W≤1200;
(3) It can only be used for full-cover doors, which can be used for all 18/22 thick door panels, but this hinge cannot be used for aluminum frame doors;
(4) When the flap is closed, the size of the cover bottom plate is 16mm-19mm;
(5) When the door moves, the trajectory will go downward beyond the closed size. Therefore, it is best not to have other panels under the door. If you insist on doing it, leave a 10mm gap between the two.
